Buy the right radios without overpaying, guaranteed!

Icom F5061 / F6061 Mobile Radio

OPC1132 DC Power Cable

* Required Fields

The Icom F5061 / F6061 mobile radio series is rapted IP54 for dust-protection and splash resistant controller, a detachable front panel for flexible installation, and 5 programmable keys. This version is analog and has a voting operation to detect the signal strength level of repeater stations. It automatically picks the strongest station making it useful for roaming between 2 or more repeater sites. 

The Icom F5061 / F6061 mobile radio series has an output power of 45-50W, a frequency range of VHF 136-174 or 400-470 / 450-512 MHz, and 512 channels with 128 zones. Also available as a base station.

Available in Analog and Digital

F5061 / F6061 Features:

  • Detachable front panel for flexible installation
  • IP 54 dust-protection and splash resistant controller
  • Advanced scanning functions including Tx channel, talk back and nuisance delete
  • 8 DTMF autodial memories and ANI function with DTMF
  • Power on password
  • Radio stun and kill functions disable a lost of stole unit over the air
  • Busy repeater lockout function
  • Surveillance function temporarily turns off the LED backlight and beep sound
  • Mirophone hanger action programmable
  • Ignition sensing line
  • Voting scan (analog mode only)
  • GPS optional with Quick Silver GPS
IDAS, 6.25kHz Digital Mode Ready

The IDAS 6.25kHz digital mode is available with the UT-126H* digital board. IDAS is Icom's digital land mobile radio system using the 6.25kHz narrowband FDMA technology. The ICF5061 series is compatible with the IDAS conventional and IDAS single-site/ multi-site trunking using the NXDN™ common air interface.
*Already installed in the F5061D & F6061D versions

Basic LTR®/Conventional Mode Operation

Group, selective, and phone calls are all available in LTR® mode. The beep on receive function informs you with a beep sound when an individual call is received

Built-in Versatile Tone Signaling

Use the built-in CTCSS, DTCS, 2-Tone 5-Tone or MDC 1200 capability to set up your own talk groups, and have your radio standby quietly when other groups are talking. The built-in 2-Tone and 5-Tone capabilities allows you to send a tone code with your call and decode multiple tone codes on a channel. 40 pairs of CTCSS/ DTCS memory channels are available.

Dot Matrix, Multi Function LCD 

With a high contrast dot matrix display, upper and lower case characters can be easily distinguished. You can change the display setting to show one line and 12 characters, or two lines and 24 characters via programming. LCD backlighting is standard.

Voting Scan (Analog Mode Only) 

The voting operation detects the signal strength level of repeater stations and automatically selects the strongest station or the first station to exceed the preset signal level. This is useful for roaming between 2 or more repeater sites.

Enhanced Scanning

While scanning, you can program which Tx channel you want when you press PTT button. Start channel, last detected channel, priority or a preprogrammed channel are selectable. In addition, the nuisance delete function temporary removes a busy channel from the scanning list.

Other features
  • ±1ppm frequency stability
  • Embedded ESN
  • Flash CPU for future upgrade
  • Built-in inversion-type voice scrambler and option UT-109R/UT-110R available
  • D-Sub accessory connector, ignition sensing line, and more
Product Type Analog Mobiles
Brand Icom
Channels 512
Frequency Range 136-174 MHz, 400-470 MHz, 450-512 MHz
Intrinsically Safe No
IP Rating (Dust and Water) IP54
Radio Display Yes
Radio Keypad Partial
Radio Power 45 Watt UHF, 50 Watt VHF
Brochure / Manual
Product Manual (544.02 KB) DOWNLOAD
Spec Sheet (365.22 KB) DOWNLOAD
Brochure (783.18 KB) DOWNLOAD

You may also be interested in the following product(s)